PROVIBTECH TM201-A00-B00-C00-D00-E00-G00 supports 22-30VDC, 100mA (upper computer power supply or 24VDC power supply), and can also choose 90-220VAC power supply, 40-60Hz, 50mA. Equipped with 4-20mA active output terminals, capable of driving loads up to 750 Ω; There is also an active output of 1-5V with an output impedance of 250 Ω; Simultaneously providing a buffer output (Buf Out) for the original signal, with output sensitivity equivalent to that of the connected eddy current sensor. The standard options are 2.0-5.0KHz, and the low-frequency options are 0.5-100Hz.
Description
Measurement performance:
Measurement parameters: Focusing on measuring the radial vibration of rotating machinery rotors, it can accurately obtain key operating parameters such as shaft vibration, swing, eccentricity, etc. It measures the peak to peak value of radial vibration (displacement), providing accurate data for equipment condition evaluation.
Measurement range: The full range is 0-200 µ m pk pk pk, which can meet the vibration measurement requirements of most rotating machinery under normal operating conditions.
Frequency response: Provides two frequency response options: standard and low frequency. The standard option is 2.0-5.0KHz, suitable for vibration monitoring of conventional rotating machinery; The low-frequency option is 0.5-100Hz, which can be used for measuring low-frequency state variables such as turbine runout and turbine eccentricity.
Electrical characteristics:
Power adaptability: Supports multiple power supply methods, including 22-30VDC, 100mA DC power supply (upper computer power supply or 24VDC power supply), as well as 90-220VAC power supply, 40-60Hz, 50mA AC power supply, making it convenient to use in different electrical environments.
Rich output interfaces: equipped with 4-20mA active output terminals, capable of driving loads up to 750 Ω, easy to connect with various control systems such as PLC or DCS, enabling remote monitoring and data acquisition; Simultaneously providing 1-5V active output with an output impedance of 250 Ω, meeting the requirements of different devices for input signals; In addition, there is a buffer output (Buf Out) for the original signal, which has the same sensitivity as the connected eddy current sensor, facilitating further analysis and processing of the original signal.
Adaptability to work environment:
Temperature range: The working temperature is from -25 ° C to+65 ° C, and the storage temperature is from -40 ° C to+100 ° C. It can adapt to a wide range of temperature environments and work stably in both cold northern and hot southern industrial sites.
Humidity tolerance: It can operate normally in non freezing environments with humidity up to 90%, has good adaptability to humid environments, and can avoid equipment failures caused by humidity issues.
Reviews
There are no reviews yet.