It can provide triple closed-loop control of speed, position, and torque, with an accuracy of ± 0.1% FS. It supports multi axis control and can simultaneously control multiple servo motors. Usually equipped with an encoder interface, it can be connected to the encoder of a servo motor to achieve position feedback and closed-loop control.
Description
essential information:
Series: ABB AC800M.
Compatible systems: ABB 800xA DCS, Compact 800 small controller, and ABB Ability ™ Cloud platform.
Electrical parameters:
Input voltage: 24V DC or 100-240V AC.
Output voltage: 0-10V DC or ± 1000VDC.
Output current: maximum 2A or 10A.
Output frequency range: 0-400Hz (servo control mode).
Output power: 0.75kW (some models support higher power).
Measurement control cycle: 0.5s.
Distribution output: DC24 ± 1V (25mA).
Signal related:
Input signal: Supports analog signals (such as 0-10V, 4-20mA), digital signals (ON/OFF), and pulse signals.
Output signal: Supports analog signals (such as 0-5V, 4-20mA), digital signals (relay/SSR drive), and pulse output.
Communication capability: The communication interface has RS485 and supports communication protocols such as Modbus and Profibus.
Mechanical parameters:
Installation method: DIN35 rail installation.
Size: Approximately 90mm x 36mm x 115mm or 170mm x 105mm x 32mm.
Protection level: IP20.
Other parameters:
Working temperature range: -20 ℃ to+60 ℃.
Processor: Adopting a 32-bit processor, partially based on ARM Cortex-A9 dual core processors, with a clock speed of up to 1GHz.
Control method: Supports algorithms such as PID control, fuzzy control, and adaptive control.
Reviews
There are no reviews yet.